How to Use a Troy-Bilt Log Splitter

TB 33 Delux Log SplitterTroy-Bilt’s log splitter is one of the company’s biggest and most powerful pieces of home equipment, especially for the typical homeowner who buys the equipment for occasional, seasonal use around the home. The key to operating the log splitter safely and with ease is to simply follow a few steps when using it either horizontally or vertically, and to keep in mind a few of the company’s most important safety guidelines and requirements. By following these procedures perfectly, homeowners can ensure that their log splitting activities remain efficient and effective, as well as safe and minimally invasive from start to finish.

Horizontal Splitting: How to Use the Log Splitter in This Position

Step 1: Prepare Logs Appropriately

To ensure even, accurate, and quick cutting of each log, be sure that the ends of the log are squared off and trimmed neatly before splitting. This will allow the wedge to be maximally effective with each swing.

Step 2: Load the Log and Use the Controls

The log should be loaded onto the equipment by holding it on the sides rather than the ends. Furthermore, the log should be stabilized only by using the built-in horizontal supports, rather than using feet or other body parts. Avoiding these unsafe practices will help to minimize the risk of injury before, during, and after log splitting.

Operate the controls using hands only, and swing the wedge one time. Bring the wedge back and then remove all split parts of the log from the log splitter. If necessary, swing the wedge a second time to split any parts that did not succumb to force the first time.

Step 3: Follow Best Practices for Log Placement

Only one log should be placed onto the equipment at a time when placed into the horizontal position. Those logs that are placed onto the equipment, if not perfectly squared off beforehand, should have their smallest or roughest edge placed so that it faces the wedge. The flattest edge should always be facing the log splitter plate at the end of the equipment.

Vertical Log Splitting with the Troy-Bilt Log Splitter

Using the log splitter in the vertical position is similar to the procedure detailed above, but does require slightly different positioning and safety concerns in order to keep operators safe and logs efficiently split.

Step 1: Prepare the Log

Logs should be placed onto the plate and stabilized using split pieces of wood or wooden ships. The log should lean up against the beam of the log splitter before the wedge is deployed.

Step 2: Deploy the Wedge

Swing the wedge toward the log, but only do so when hands, fingers, feet, and other body parts are away from the equipment. If the log is split completely, place a new log on the plate. If a second pass is required, go ahead and swing the wedge a second time.

Best Practices for Safe and Effective Log Splitting with Troy-Bilt Equipment

Troy-Bilt log splitters are designed to make much easier work of splitting logs than a typical axe would allow for, but that means they do so at the expense of safety when operators don’t closely follow company guidelines and best practices. Before getting started with this powerful Troy-Bilt equipment, be sure to keep the following safety guidelines and procedures in mind.

1. Remove all loose jewelry or clothing before operating the log splitter. These items can easily get stuck in the equipment and, in some cases, they can cause significant injury to operators who are unprepared for the resulting shock, force, and swing of the wedge.

2. Generally, a 20-foot radius should be kept around the equipment at all times. Children, pets, and other bystanders should be instructed to remain outside this radius at all times for maximum protection during active log splitting.

3. The log splitter should not be used to split any other material, since the wedge is not designed for non-wood materials and could easy cause damage or injury if used for non-approved purposes.

4. Only one person should operate the log splitter at any given time. Having more operators only increases the chance of injury, and the equipment typically does not require more than one set of hands to be operated with ease.

5. Children under the age of 16 generally should not be able to operate the equipment at all. Those children over the age of 16 should only be permitted to operate the log splitter after reviewing safety guidelines and being extensively trained by an adult with hands-on experience.

TroyBiltPartsOnline.com Has the Parts and Expertise that Customers Need

With a great selection of OEM parts, a long history of selling and supporting Troy-Bilt log splitters, and an extensive collection of customer support and service manuals, TroyBiltPartsOnline.com is a great resource for any Troy-Bilt equipment owner. The website is intuitive to use, backed by great industry experience, and full of tips that will increase safety, boost efficiency, and make sure that each piece of Troy-Bilt equipment lives up to its advertised potential.

This entry was posted in Uncategorized and tagged , , . Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>